IPv6 Support
************

Zebra fully supports IPv6 routing.  As described so far, Zebra supports RIPng, OSPFv3 and BGP-4+.  You can give IPv6 addresses to an interface and configure static IPv6 routing information.  Zebra-IPv6 also provides automatic address configuration via a feature called address auto configuration.  To do it, the router must send router advertisement messages to the all nodes that exist on the network.

Router Advertisement
====================

 -- Interface Command: ipv6 nd send-ra

 -- Interface Command: ipv6 nd prefix-advertisement IPV6PREFIX

     interface eth0
      ipv6 nd send-ra
      ipv6 nd prefix-advertisement 3ffe:506:5009::/64